4-port 10/100 Mb Ethernet Convenient Switch

3 Models for: Indoor, Factory Floor, Outdoors

email us for pricing.

The yellow-label Magnum S14 regular units are for office and indoor wiring
closet environments. These are the economical base units in the S14 Switch family.
An external AC power supply for either North America (-d, 115vac 60Hz) or international
(-i, 230vac, 50Hz) is included. The ambient temperature rating is 0° to
40°C, office grade. A robust metal case with convection cooling is featured. Metal
mounting clips are included, and rack-mount tray options are available.

The orange-label Magnum S14H Hardened units are for factory floor applications.
The S14H models are built with high-grade components and are constructed
using special thermal techniques (patent pending) and a metal case for heavy duty
industrial jobs. In addition to a Hardened AC power option and jack, terminals for
internal DC power choices at 8 to15V, 24V or -48V DC are included. The ambient
temperature rating is for industrial use. No internal air flow is required for cooling,
so it resists dust, dirt, moisture, smoke and insects. Mounting options include standalone
panel-mounting, DIN-Rail, or rack-mount tray.

The red-label Magnum S14P Premium-rated units are for temperature uncontrolled
sheltered applications, typically located outdoors. The S14P models
are built with premium-grade extended temperature components, and use similar
thermal techniques (patent pending) as the S14H Hardened units. In addition to a
Premium-rated AC power option and jack, terminals for internal DC power choices
at 8 to 15V, 24V or -48V DC are included. When used outdoors, the S14P should be
sheltered from elements. Mounting options include stand-alone panel-mounting,
DIN-rail, or rack-mount tray.

All S14 Convenient Switch models come with two (2) sets of LED indicators.
One set is on the front for viewing convenience when the unit is wallmounted,
and one LED set is mounted in the end adjacent to three of the RJ-45
ports for easy viewing when units are in a rack-mount tray. The Magnum S14
family of Convenient Switches and other Magnum products are designed and
manufactured in the USA and backed by a three-year warranty.

PERFORMANCE:
Data Rate: 10 / 100 Mb, FDX and HDX modes on all 4 ports.
Auto-negotiation and auto-cross MDI-MDIX on all four RJ-45 ports
Occurs at LINK-enable. No cross-over cables required.
Non-blocking switching, 128KB packet buffer memory
Address buffer storage = 2K addresses
Address buffer age-out time = 300 seconds

NETWORK STANDARDS:
Ethernet IEEE 802.3, IEEE 8021.3u; IEEE 802.1p, 100BASE-TX, 10BASE-T
Data packets that have the 4 bytes tagged VLAN field (IEEE 802.1q)
inserted in them are received and transmitted unchanged by all S14’s.

OPERATING ENVIRONMENT:
Ambient Temperature ratings
S14: the ambient temperature rating is 0° to 40°C.
S14H: the ambient temperature rating is –25°C to 60°C
long term per independent agency tests (UL), or
–40°C to 85°C short term per IEC Type Tests
S14P: the ambient temperature ratings of –40°C to 75°C
long term per independent agency tests (UL), or
–50°C to 100°C short term per IEC Type Tests.
Storage temperature, all models: -40° to 185°F (-40°to 85°C)
Cold start: S14H model to -20°C, S14P model to -40°C
Ambient Relative Humidity, all models: 5% - 95% (non-condensing)
Altitude, all models: -200 to 50,000 ft. (-60 to 15,000m)
Conformal coating (humidity protection) option, request quote.
H and P models are designed for NEBS compliance, including
vibration, shock, and altitude.

PACKAGING:
Enclosure: Robust sheet metal (steel)
Dimensions of units: 3.5 in H x 3.0 in W x 1.0 in D
(8.9 cm x 7.6 cm x 2.5 cm)
Weight: S14 Switch Units: 8.6 oz (243g)
Power Supply - d, i: 5.9 oz (170g)
Power Supply - Hd, Hi: 5.8 oz (165g)
Power Supply - Pd, Pi: 7.9 oz (225g)
Cooling Method: Convection on regular model,
case used as a heat sink on H and P models

MOUNTING FOR S14 FAMILY OF SWITCHES:
Metal panel mounting clips: included
DIN-Rail mounting option:
Model # DIN-RAIL MC2, illustrated here;
Rack-mount option: Model MC14-TRAY.
Depth: 6.0”, Width 17”,
Height 2.25”(15 cm D x 43cm W x 5.7cm H)

PORT CONNECTORS:
RJ-45 with auto-cross, 100BASE-TX and 10BASE-T: shielded 8-Pin
female. Supports shielded (STP) and unshielded (UTP) Cat. 3, 4, 5. For
PoE Pass-through option on H and P models, request quote.

LED INDICATORS (dual, front and end, port #4 front only):
POWER: ON for power applied
10/100 per port: Steady ON for 100 Mb speed, OFF for 10 Mb speed
LK/ACT per port:Steady ON for LINK w/no traffic, blinking for Activity.
F/H per port 1,2,3 in end: Steady ON for F/D mode, OFF for H/D mode.

POWER SUPPLIES FOR AC (EXTERNAL):
Power input DC jack (8-15V) is 2.5mm, center +ve, with 6ft. DC cord
Input: 115vac at 60 Hz for “-d” models, 230vac at 50 Hz
for “-i” models that have IEC power connector in the PS unit
Input: 100-240vac at 47-63 Hz for “-Hd” and “Hi” models, see
footnote 1
Input: 100-240vac at 47-63 Hz for “-Pd” and “Pi” models, see
footnote 2

POWER INPUT OPTIONS FOR DC:
12 DC, internal (range of 8.0 to 15V DC), built-in screw terminal
block for +, -, ground. The 8-15V DC jack is also present.
24V DC internal (range of 18 to 36V DC) built-in screw terminal
for +, -, ground. The 8-15V DC jack is also present.
-48V DC internal (range of 30 to 60V DC), built-in screw terminal
block for +, -, ground. The 8-15V DC jack is also present.
Note1: the 8-15V DC jack can be used for dual source DC input
Note 2: internal DC power floats, user may ground + or – if desired.
Power Consumption, all models: 3 Watts typical. 4 Watts max.

AGENCY APPROVALS AND STANDARDS COMPLIANCE:
UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A.
NEBS L3 and ETSI compliant
H and P models: IEEE 1613 Env. Std for Electric Power Substations
P model: NEMA TS-2 and TEES for traffic control equipment
P model: designed for above-the-ceiling (plenum) installation
IEC61850 EMC and Operating Conditions Class C for Power Substations
WARRANTY:
Three years Made in USA

Footnotes:
1: External 12V1A power supply, wall plug or power cord for North America receptacles
AC input. Temperature rating same as S14H, see above. (North America: for spare,
order Model PSH-12V1A-Hd. International: order Model PSH-12V1A-Hi with IEC plug).
2: External 12V1A power supply, rated for outdoor temperatures same as S14P,
see above. Universal AC input with recessed IEC plug. (North America: for spare,
order Model PSP-12V1A-Pd, International: order Model PSP-12V1A-Pi with IEC plug).
©2005 GarrettCom, Inc. Printed in United States of America Doc No. S14-R10 4/05
GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or
model offerings without notice. GarrettCom, Magnum, Personal Switch, Link-Loss-Learn, S-Ring,
Convenient Switch and Converter Switch are trademarks and Personal Hub is a registered trademark
of GarrettCom, Inc. NEBS is a registered trademark of Telcordia Technologies. UL is a registered
trademark of Underwriters Labs.
10/100 Mb Convenient Switch
Models S14, S14H, S14P
 

Magnum S14-d,i: Magnum Convenient Switch, four 10/100 RJ-45 ports in a compact package,
temperature rated for office and wiring closet environments. External AC PS. @ email us for pricing

Magnum S14H-Hd,Hi: Magnum Hardened Convenient Switch, four 10/100 RJ-45 ports in a compact
package, rated for factory floor environments. Internal 8 to15VDC terminal block. @ email us for pricing
External AC Hardened power supply included.
Magnum S14H-12VDC: Same as S14H-Hd,Hi except external AC Hardened power supply not included
Magnum S14H-24VDC: Same as S14H-12VDC except for 24VDC power input.
Magnum S14HR-24VDC: Same as S14H-24VDC but includes DIN-Rail option, Model DIN-RAIL MC2. @ email us for pricing
Magnum S14H-48VDC: Same as S14H-12VDC except for -48VDC power input.

Magnum S14P-Pd,Pi : Magnum Premium-rated Convenient Switch, four 10/100 RJ-45 ports in a compact
package, rated for temperature un-controlled (outdoor) environments. @ email us for pricing
Internal 8 to 15V terminal block. External AC Premium power supply included.
Magnum S14P-12VDC: Same as S14P-Pd,Pi except external AC Premium power supply not included.
Magnum S14P-24VDC: Same as S14P-12VDC except for 24VDC power input.
Magnum S14PR-24VDC: Same as S14P-24VDC but includes DIN-Rail option, Model DIN-RAIL MC2. @ email us for pricing
Magnum S14P-48VDC: Same as S14P-12VDC except for -48VDC power input.

Server Floor & Wall Enclosures Racks

Product Design, Construction, & Specifications are subject to change without notice. Prices are subject to change without notice. Inventory Subject to Prior Sale. Not Responsible for Errors in Print. Trademarks & Copyrights are the property of their respective owners.  Please verify information with us. Buyer specifically acknowledges waiver of any claim against either manufacturer or distributor regarding consequential or incidental damages to person or property, including without limitation damages for loss of use, lost time, loss of profits, lost income or other incidental or consequential damages. Pictures may not represent actual products and are for general representational purposes.